EE25-XS6 USB 3.0 SLIM box

The EE25-XS6 external box is designed for SSD disks and low-profile 2.5" SATA disks with a height of up to 7 mm.
It deals with SATA I / II / III SSD and HDD without limiting maximum capacity. The HDDs with height of 9.5 mm are not supported.
A special design for more and more widespread only 7 mm high SSDs and HDDs.

ANY 7 mm 2.5" HDD/SSD • ANY CAPACITY • SPECIAL DESIGN
 

The EE25-XS6 SUPER SLIM is like a sports car among ordinary boxes - fast, low, and elegant.
Ideal use - inserting a new SSD disk into the box creates a very fast and elegant thin external disk.
Or, by inserting a low-profile 7 mm hard disk removed from an ultrabook when replacing with a new SSD, you'll get a luxury slim external disk.

SUPER SLIM • FAST & ELEGANT
 

The USB 3.0 interface guarantees seamless, high-speed connectivity to all existing computers.
The actual SATA III/6G interface with UASP support allows you to enjoy the speed of modern SSD disks.

USB 3.0 • SATA 6G • UASP
 

All-metal design - the box body and both fronts are cast from aluminium alloy.
The robust metal case guarantees perfect mechanical protection of the disk and excellent heat dissipation.
The elegant brushed surface is very practical at the same time.

FULL METAL ROBUST CASE • BRUSHED ALUMINIUM
 

Reading of S.M.A.R.T. information monitoring the condition of the external disk.
Supports spinning down of connected disks as well as the box.
You can boot your computer from an SSD or hard drive in the external box.

HDD S.M.A.R.T. INFO • HDD AUTO STOP • BOOT SUPPORT
 

Automatic installation can be handled even by a layman. Drivers are included with operating systems and are installed completely automatically.
Simple disk installation - insert the disk directly into the SATA connector of the electronics board, insert both into the box body and fasten the front with two screws using a screwdriver that is included. That is all.
The power to the box and disk is supplied via USB bus without the need for external power supply.

AUTO INSTALL • EASY MOUNTING • USB POWER

The slim all-metal AXAGON EE25-XS6 SUPER SLIM SILVER external box with USB 3.0 and SATA 6G interface intended for SSD or 7 mm low profile 2.5" SATA disks.

The actual SATA III/6G interface with UASP support allows you to enjoy the speed of modern SSD disks.

Reading of S.M.A.R.T. information monitoring the condition of the external disk. Supports spinning down of connected disks as well as the box.

A durable aluminium case and aluminium fronts of the box guarantee perfect mechanical disc protection and excellent heat dissipation.

Easy installation of the hard disk as well as automatic installation can be handled even by a layman.

Ideal use - either as a very fast and thin external disk with a new SSD disk inserted, or as a luxury, slim external disk with an inserted 7 mm low-profile hard disk, typically removed from an ultrabook when replacing a new SSD.

Features:
• Compatible with USB 3.0 and backward compatible with USB 2.0.
• Supports transmission rates 12 / 480 / 5000 Mb/s (low / full / high speed).
• Supports 2.5" SATA III/II/I SSD and HDD of a max. height 7 mm without limiting maximum capacity. The HDDs with height of 9.5 mm are not supported.
• Compliant with Serial ATA 3.1 specification (SATA/600), transmission rates of up to 6 Gb/s.
• Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s).
• Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s).
• The total bandwidth / transmission rate of the box is determined by the USB 3.0 interface used (theor. 5 Gbit/s).
• Supports UASP (USB Attached SCSI Protocol).
• SSD/HDD boot support in external box.  
• HDD Auto Spindown - automatic spindown of a disk after period of inactivity lasting 10 minutes.
• HDD Turn Off - turns off the disk after removing the device or spinning down the PC.
• Possibility to connect your device while running thanks to the Hot Plug support.
• Full Plug and Play support.
• Connection via micro USB 3.0 female connector.
• USB 3.0 Type A male / micro USB male cable 60 cm long is included.
• Supplying the power via USB 3.0 bus up to 900mA from one USB port is sufficient in all cases.
• A decent blue LED indicating the connection to the computer's USB port (permanent light) and data transmission (blinking).
• All-metal design - the box body and both fronts are cast from aluminium alloy, luxury brushed surface.
• The disk installation is very easy. The disk is connected directly into the SATA connector of the motherboard, and inserted into the box body; the front is fastened with two screws using a screwdriver that is included.
• Compact dimensions 126 x 79 x 11 mm.
• External box weight 72 g (without USB cable and disk).

Supported OSs: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 and later, Windows Server 2003 / 2008 / 2012 / 2016 and later (supported are all 32- and 64-bit Windows OS versions), Mac OS X 10.x and higher, Linux with kernel 2.6.x and above.
Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available. 

Package contains:
• USB 3.0 2.5" external box in silver colour,
• USB 3.0 cable 60 cm long,
• mounting screws and the screwdriver,
• a multilingual manual ENG/CZ/DE/ESP/FR/HU/IT/PL/RO/RU/SK,
• packed in a cardboard box.