HUE-X3B USB TRINITY hub
Four-port USB 2.0 hub with a permanently attached USB cable. Black.
Input | USB 2.0 |
Output | USB 2.0, 4-port output |
PC connection | USB type A-M, permanently connected cable, cable 1.2 m |
Power supply | on the bus |
Where to buy
The four-port AXAGON HUE-X3B USB 2.0 TRINITY hub features a highly practical design.
The USB ports positioned around the circumference of the hub for trouble-free connection of any USB device with a large volume of mass around the connector.
One USB port located on the top is in turn suitable for connecting a wireless Bluetooth or Wifi adapter for better signal reception, and just one hand is enough to quickly insert a flash disk, for example.
A 120 cm long USB cable permanently attached in the hub makes it convenient to put USB ports on your work table from a desktop computer located under the table.
The highly compact and lightweight body of the hub is, however, thanks to its smart construction, also very strong and durable and will reliably serve you not only at home but also while travelling.
Features:
• 4x downstream USB 2.0 port, 1x upstream USB 2.0 port with Type A male connector attached on a 120 cm long cable.
• Fully compatible with USB 2.0 and backward compatible with USB 1.1.
• Supported transmission rates 1.5 / 12 / 480 Mb/s (low / full / high speed).
• Full Plug and Play and Hot Plug support.
• Allows up to 127 USB devices to be connected by cascading.
• Power supply via USB - bus-power mode (5V - 500mA).
• Current overload detection and protection.
• Dimensions 56 x 50 x 30 mm, weight 50 g (incl. USB cable).
OS support:
• MS Windows XP / Vista / 7 / 8 / 8.1 / 10 and later, Windows Server 2003 / 2008 / 2012 / 2016 and later (supported are all 32- and 64-bit Windows OS versions), Mac OS X 10.4.x and higher, Linux with kernel 2.6.x and above.
• Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available.
Package contains:
• USB 2.0 hub with a permanently connected 1.2 m long cable,
• Packed in a double-sided heat sealed blister with clearly indicated parameters and installation procedure.
Input | |
interface | USB 2.0 / USB 1.1 |
rate | 480 / 12 / 1.5 Mbit/s (high / full / low speed) |
connector | USB Type A male (on the cable) |
cable | 1.2 m, permanently connected |
Output | |
interface | USB 2.0 |
number of ports | 4 |
connector | USB Type A female |
Supported features | |
overload protection | yes |
automatic installation | yes |
Plug and Play | yes |
Hot Plug | yes |
Other features | |
indication | no |
dimensions | 65 x 50 x 30 mm |
weight | 50 g (incl. USB cable) |
Power supply | |
on the bus | yes (USB bus power) |
through power adapter | no |
OS support | |
MS Windows | 10 / 8.1 / 8 / 7 / Vista / XP (all 32- and 64-bit versions) |
MS Windows Server | 2016 / 2012 / 2008 / 2003 (all 32- and 64-bit versions) |
Mac OS | X 10.x and higher |
Linux | kernel 2.6.x and higher |
Package contents
- USB hub with a permanently connected 1.2 m cable
- installation procedure specified on the packaging
Product package
- double-sided blister sealed along the perimeter
- package dimensions 18.1 x 12.4 x 3.6 cm
- weight of 1 pc package 86 g
- EAN 8595247902504
Export package
- number of pieces in the box: 100
- total weight of the box: 10,15 kg G.W.
- box dimensions: 40 x 33.5 x 65 cm
FAQ
A): The necessary drivers are already included in all operating systems and install completely automatically, and no additional drivers are needed.
B): Plug the USB hub into another USB port (on the back of the computer where the USB ports are integrated directly into the motherboard). It should re-detect the USB hub and reinstall the drivers. Alternatively, try replacing the USB cable. The obsolete driver of the USB controller could also cause problems. Manufacturers of USB 3.0 chipsets often issue new versions of drivers to improve compatibility with different devices. If the problem with the USB bub persists, plug it into the USB port of another computer to verify its functionality.
A): The phone / tablet cannot be powered by an OTG cable, this is given by the OTG principles. The tablet can be connected to a charger by a normal cable and charged itself or devices can be connected to it with an OTG cable
B): Phones / tablets that have a power connector located outside the microUSB have an advantage - here the tablet can be powered through a round connector and connect other peripherals (mouse, keyboard, flash disk, etc.) to the microUSB using an OTG cable (via the USB hub).
A): In the vast majority of cases, the USB hub can handle connection of one 2.5" external box. If more external boxes are connected, a higher current is needed that ordinary USB cannot deliver.
B): In this case, an auxiliary power supply is required. Use a USB hub with auxiliary power supply.
A): You can use a passive USB cable to connect a USB hub to your computer. However, with longer cables the USB hub may not work reliably.
B): In this case, we recommend using an active extension USB repeater cable, such as AXAGON ADR-205 or ADR-210.