PWB-L10QD 10.000 power bank
Compact power bank with 10,000 mAh capacity and Quick Charge 3.0 support.
| Input | USB type C-F, QC3.0 |
| Output | USB type A-F, 2-port output, QC3.0 |
| PC connection | USB type A-M, disconnectable cable, cable 20 cm |
| design | Li-pol, 10.000 mAh, metal casing |
| Extra | LCD display |
Where to buy
Compact PWB-L10QD power bank delights the user with QC 3.0 fast charging technology in both directions, USB-C input, LCD display and a modern design of the metal case.
An external 10.000mAh battery is such a golden middle way - it keeps two mobile devices alive during your active weekend away from home and does not weigh so much so you can still carry it with you all the time.
Two outputs are able to serve two mobile devices at the same time.
The modern Li-polymer cells used are thinner, significantly more durable and safer than conventional Li-Ion cells, and also contribute to an excellent charging efficiency exceeding 90%.
10.000 mAh • 2 x OUTPUT • LI-POLYMER
The big advantage is the use of Qualcomm Quick Charge 3.0 charging technology, which allows for very fast charging not only of the charged device, but also the power bank itself.
Quick Charge 3.0 technology allows charging mobile devices with current up to 3A at 5V, 2A at 9V or 1.5A at 12V. The second output allows standard charging with current up to 2.4A at 5V.
The USB Type-C input with two-sided connector and QC3.0 support allows you to fully charge the power bank within 4 hours and 10 minutes.
Allows also simultaneous recharging of a power bank and charging of a connected device.
3A USB-C & QC3.0 INPUT • QC3.0 + 2.4A OUTPUT
Durable body of the power bank made of an aluminium alloy significantly reduces the risk of damage.
It will be particularly useful when travelling, where there is no need to worry too much about its safety.
Pleasant matte surface prevents unwanted fingerprints or slipping out of your hand.
ROBUST METAL CASE • MATTE SURFACE • FINGERPRINT FREE
Intelligent electronics automatically protects the power bank from all adverse effects.
Protection against overload, voltage spikes, overcharging as well as overheating.
Protection against short circuit and excessive discharging.
Automatic battery on / off for comfortable operation and saving of stored energy.
AUTOMATICALLY FULLY PROTECTED • AUTOMATIC ON / OFF
The universal use of the power bank is supported by included cable with a micro USB connector, including a reduction with USB-C connector. Mobile devices with both a standard micro USB and modern USB Type-C inputs can be charged.
Both the cable and reductions support Quick Charge fast charging and can also be used for data transmissions.
The cable’s quality is underlined by its nylon braiding, aluminum connector jacketing and non-losable fixing of reduction.
USB-C & micro USB • CHARGING & DATA SYNC • NYLON BRAIDING • ALUMINUM SHELL
The LCD display accurately displays the power bank's battery charge level as a percentage.
When charging the power bank, the current battery level 0 to 100 percent flashes on the display.
When charging the device from power bank, the display always shows the current battery charge level 0 to 100 percent.
When the charging is complete, the LCD display will go out after 50 seconds.
LCD DISPLAY • CURRENT CAPACITY IN PERCENTAGES
Compact AXAGON PWB-L10QD 10,000 mAh power bank with QC 3.0 quick-charging technology in both directions, USB-C input, LCD display and a modern metal shell design.
The high-quality Li-polymer cell used has a high efficiency of approx. 95% (at discharging current 1A).
The big advantage is the use of Qualcomm Quick Charge 3.0 charging technology, which allows for very fast charging not only of the charged device, but also the power bank itself.
Two outputs allow charging of two devices at the same time. Quick Charge 3.0 enables 3A charging at 5V, 2A at 9V or 1.5A at 12V, second output allows standard charging with current up to 2.4A at 5V.
Supports simultaneous recharging of a power bank and charging of a connected device.
With the built-in LCD display, you can quickly and accurately detect the battery charge level when charging the power bank or connected device.
Intelligent electronic six-fold protection of battery cells from all adverse effects helps to protect both the device being charged and the power bank itself.
Durable compact aluminium body with a nice, matte finish to prevent unwanted fingerprints.
Charging of tablets, smartphones, cameras, navigation, game consoles, and other devices that support power supply from the USB port, incl. latest devices with Qualcomm Quick Charge 3.0 charging technology is easier now than it ever has been.
External battery features:
• Li-pol battery with a capacity of 10,000 mAh / 3.7 V, i.e. 37 Wh.
• QC3.0 input: 5V/3A, 9V/2A, 12V/1.5A with the USB Type-C double-sided connector.
• QC3.0 output: 5V/3A, 9V/2A, 12V/1.5A with the USB Type A connector.
• 2.4A output: 5V/2.4A with the USB Type A connector.
• Support for simultaneous charging of two devices.
• Support for simultaneous charging of a power bank and a mobile device.
• A lifetime minimum of 500 charging cycles (at least 80 % of the original capacity).
• Projected lifetime of 700 charging cycles (when the battery usage conditions are met).
External battery control electronics functions:
• Overload protection.
• Short circuit protection.
• Protection against voltage spikes.
• Protection against excessive discharging.
• Protection against overcharging.
• Protection against overheating.
• Automatic switching on of the power bank after connecting a charging device for comfortable operation.
• Automatic switching off of the power bank after 50 seconds of being idle in order to save stored energy.
Typical charging time of a fully discharged external battery:
• Approx. 4:10 hours from a network-based USB charger with min 3A output (not included).
Indications:
• The LCD display accurately displays the power bank's battery charge level as a percentage.
• The switched-off power bank when the button is pressed shows the current battery charge level 0 to 100 percent on the LCD display.
• When charging the power bank, the current battery level 0 to 100 percent flashes on the display.
• When charging the device from power bank, the display always shows the current battery charge level 0 to 100 percent.
• When charging is complete, the LCD display will go out after 50 seconds.
Other features:
• The aluminium body is firmly attached to the fronts made of durable ABS plastic.
• The matte surface of the aluminum body reduces fingerprinting.
• Dimensions: 126 x 67 x 17 mm.
• Weight: 243 g.
• Working temperature: +5 ~ +35 °C.
• Storage temperature: -20 ~ +50 °C.
• Humidity: 20 ~ 85%.
Package contains:
• 10.000 mAh power bank,
• USB Type A / micro USB 5pin power and data cable with a reduction to USB Type C of 20 cm length,
• multilingual manual ENG/CZ/DE/ESP/FR/HU/IT/PL/RO/RU/SK/BG,
• packed in a cardboard box.
Notice:
The actual (physical) cell capacity of this battery is 10,000mAh. However, no external battery can transfer all the energy into the battery of a mobile device without losses. In power transmission, losses occur inside the voltage converter from 3.7 V to 5 V, on the transient resistances of contacts, due to lower efficiency of energy storage in the battery of the charged device, temperature conditions, higher charging current, and the like. The actual efficiency of this battery is around 95 % at a 1A discharge current, depending on the specified conditions.
| Input | |
| input power | 5V/3A, 9V/2A, 12V/1.5A (QC3.0) |
| connector | USB Type C female (on the power bank) |
| connector | USB Type A male (on the cable) |
| cable | 20 cm, disconnectable |
| Output | |
| number of ports | 2 |
| output power | 5V/3A, 9V/2A, 12V/1.5A (QC3.0) + 2.4A / 5V |
| connector | 2x USB Type A female (on the power bank) |
| connector | USB Type C male + micro USB male (on the cable) |
| battery | |
| battery type | Li-pol / 3.7 V |
| capacity | 10.000 mAh / 37 Wh |
| minimum lifetime | 500 charging cycles |
| projected lifetime | 700 charging cycles |
| Supported features | |
| charging 2 devices at the same time | yes |
| charging the power bank and device at the same time | yes |
| overload protection | yes |
| short circuit protection | yes |
| protection against voltage spikes | yes |
| protection against excessive discharge | yes |
| protection against overcharging | yes |
| protection against overheating | yes |
| automatic shutdown when charging | yes |
| automatic shutdown when idle | yes |
| Other features | |
| design | metal / plastic |
| indication | LCD display - battery charge level 0-100% |
| controls | button - turns on the battery charge status indication |
| LED Lamp | no |
| dimensions | 126 × 67 × 17 mm |
| weight | 243 g |
Package contents
- external 10,000 mAh battery
- supply cable 20 cm long
- user manual
Cable
- charging and data cable
- USB Type A-M
- microUSB M + reduction to USB Type C-M
- 20 cm long
Manual
- printed multilingual manual ENG/CZ/DE/ESP/FR/HU/IT/PL/RO/RU/SK/BG
Product package
- cardboard box
- package dimensions 16.5 x 10 x 4 cm
- weight of 1 pc package 308 g
- EAN 8595247903754
Export package
- number of pieces in the box: 40
- total weight of the box: 12.95 kg G.W.
- box dimensions: 38.5 x 34 x 23 cm
FAQ
A): We recommend using the original micro USB cable supplied with the power bank.
B): The original cable has stronger conductors and less resistance. This minimizes charging losses. General cables for phones may have smaller diameter conductors, which may cause slower or interrupted charging. Such cables are designed for synchronization (data connection) and are not suitable for charging.
A): The capacity of the power bank is determined by the actual (physical) capacity of the battery cells that the power bank is equipped with.
B): The internal power bank batteries have a voltage of 3.7 V. To charge the phone, this voltage needs to be converted to 5 V, which is the standard for USB interface. In the charged device (such as a mobile phone or tablet), conversion from 5 V to 3.7 V is in turn needed to charge the internal batteries. With each voltage conversion, losses occur (most often in the form of heat), which are usually 5 to 15 %. As a result, the energy that the charged device is able to take is after necessary conversion of voltage of the two devices reduced by 2 x 5 % to 2 x 15 % and the efficiency of charging reaches 70 to 90 %.
A): Fast charging must be supported also by the equipment being charged - e.g. cell phone, tablet etc.
B): If charging from an external battery lasts approximately as long as from the charger, it means that the device does not have a fast charging function.
A): We recommend that you do not discharge the power bank completely to zero and do not let it run out of power for a long time.
B): If you want to extend the life of your power bank, do not discharge it to zero. It is good to leave about 10 to 25 % of its capacity. If the power bank is discharged, we recommend recharging it in the shortest possible time. Never store the power bank in a discharged state. As soon as you start charging the power bank, do not interrupt charging. Interrupted charging again reduces the life of your power bank.
PWB-L10
PWB-L10QC
PWB-M10
