PCEU-034VL PCIe controller 4x internal SuperSpeed USB

PCI-Express card with four internal USB 3.2 Gen 1 ports with two 19-pin internal connectors. Low profile.

Input PCI-Express, 1-Lane
Output USB 3.2 Gen 1, UASP, 4-port output
rate up to 5 Gbit/s
PC connection x1 Slot
Power supply on the bus
design standard profile, low profile

Where to buy

The AXAGON PCEU-034VL PCI-Express card adds four internal high speed USB 3.2 Gen 1 ports to your desktop computer.

Four independent SuperSpeed USB ports in the form of two internal 19-pin USB 3.0 connectors. It is possible to connect an internal SuperSpeed USB reader and the front USB ports of a PC case simultaneously.

The USB controller is equipped with a renowned VIA Labs company chipset with proven seamless compatibility and UASP support.

Low profile bracket is included in the package for mounting the adapter into low profile cases.

• PCI-Express 2.0 interface, compatible with PCI-Express 1.0a / 1.1 / 2.1 / 3.0.
• Number of lines: 1-Lane (x1), compatible with x1 / x4 / x8 / x16 PCIe slots.
• A bandwidth of 1-Lane PCI-Express 2.0 bus is 5 Gb/s.

• 2x 19-pin internal USB 3.2 Gen 1 connector with two ports to connect, for example, the internal SuperSpeed USB reader or front USB ports of the PC case.
• SuperSpeed USB - USB 3.2 Gen 1 interface (before USB 3.1 Gen 1 / USB 3.0).
• Compatible with USB 3.2 Gen 2, backward compatible with USB 2.0 and USB 1.1.
• Supports transmission rates 5000 / 480 / 12 / 1.5 Mb/s (super / high / full / low speed).
• When connected to a PCI-Express bus version 1.0, theor. transmission rate max. 2.500 Mb/s.

Other features:
• Full Plug and Play support.
• Support concurrent activity of SuperSpeed USB, USB 2.0 a USB 1.1 devices.
• Compliant with the final official xHCI specification revision 1.0 by USB-IF.
• Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later.
• Fully supports Hot Plug connecting and disconnecting of USB devices while running.
• Powering the controller and connected USB peripherals via PCI-Express bus.
• VIA Labs VL805 chipset is used.

Supported operating systems:
• MS Windows XP / Vista / 7 / 8 / 8.1 / 10, Windows Server 2003 / 2008 / 2012 / 2016 (supported are all 32- and 64-bit Windows OS versions), Linux with kernel 2.6.31 and above.

• Note: Drivers are only installed for Windows XP / Vista / 7. For Linux, Windows 8 / 8.1 / 10, Server 2012 / 2016 and later versions, no external drivers are required, they are already part of the operating system.

Package contains:
• PCI-Express controller with a standard bracket,
• low profile bracket,
• packed in a cardboard box.

interface PCI-Express 2.0
number of lines 1-Lane (x1)
rate 5 Gbit/s
compatibility x1 / x4 / x8 / x16 PCIe slot
compatibility PCI-Express 1.0a / 1.1 / 2.0 / 2.1 / 3.0
interface USB 3.2 Gen 1 / USB 3.0 / USB 2.0 / USB 1.1
rate 5000 / 480 / 12 / 1.5 Mbit/s (super / high / full / low speed)
number of ports 4
connector 2x 19pin internal USB 3.0 (2x10pin)
total permeability 5 Gbit/s theoretically (give by PCIe 2.0 1-Lane input)
Supported features
UASP yes (Win 8 and higher)
automatic installation yes (from Win 8 and Server 2012)
Plug and Play yes
Hot Plug yes
Other features
standard profile yes (factory fitted blind plug)
low profile yes (blind plug included in the package)
chipset VIA Labs VL805
Power supply
on the bus yes (PCI-Express bus power)
OS support
MS Windows 10 / 8.1 / 8 / 7 / Vista / XP (all 32- and 64-bit versions)
MS Windows Server 2016 / 2012 / 2008 / 2003 (all 32- and 64-bit versions)
Linux kernel 2.6.31 and higher

Package contents

- PCI-Express controller with a standard bracket
- low profile bracket
- installation guide


- printed multilingual manual CZ/DE/DK/ENG/ESP/FIN/FR/GR/HR/HU/IT/NL/PL/PT/RO/RU/SK/SWE/TR/BG/CN/ARA

Product package

- cardboard box
- package dimensions 14.5 x 11 x 2.8 cm
- weight of 1 pc package 81 g
- EAN 8595247904454

Export package

- number of pieces in the box: 100
- total weight of the box: 8.8 kg G.W.
- box dimensions: 58 x 32 x 29 cm


A): If the PC does not run with the card or the card is mistakenly detected in “Device Manager”, or if there is a yellow exclamation mark on the driver, or if “Device Manager” reports an error code “Code 10 - The device cannot start”, the card is in conflict with another device in your computer.

B): In most cases, this conflict can be solved by moving the card to another PCI (PCIe) slot, with the BIOS assigning other free resources to the card. If the move does not help, try the card separately, with no additional cards inserted. If the card cannot be moved to another slot, you can reset the BIOS of the computer (by jumper on the board or pulling out the backup battery, we recommend that you note all the original settings and reset everything to the required values). This will cause the IRQ, DMA, and I/O resources to be redistributed.

A): If the copy speed is approximately 35 MB/s, it means that the connection between the controller and the connected device is working only in the USB 2.0 mode. Some types of USB 3.0 devices may have a problem with proper detection.

B): Make sure that the connected device is USB 3.0 compatible. Please check if an additional power supply to the controller is connected (the power reduction is not included, the card is powered by a standard power connector that is part of each source; we recommend avoiding Molex connectors and splitters that often cause problems). The error could be caused by, for example, the old firmware of the device you want to connect, some manufacturers provide a new firmware to their products, which could solve this situation. Alternatively, try replacing the USB 3.0 cable that may be damaged. When testing, do not use USB 3.0 extensions that could also cause this problem.

A): Booting from an additional USB card is not possible because each card has a different chip. The BIOS of the motherboard does not contain information that will allow to "see" the connected USB device. Detection of attached devices occurs only after the additional card drivers have been booted when the operating system starts running.

B): When using the integrated USB from the motherboard, of course, the BIOS is programmed to include information about the chip of the controller used for USB on the motherboard. Therefore, the motherboard BIOS "sees" the connected USB device and therefore can boot from it.

A): Please check your BIOS settings. Power Management Setup – Wake Up Event Setup – Resume by PCI-E Device (individual items may vary by MB type) should be set to disabled.

B): If this does not help, try updating your motherboard BIOS and check the ACPI item when still in the BIOS If not even this helps, move the controller card to another PCIe slot (may also be x16 - slots differ only in the number of lines). It is possible that the card is in conflict with another device on your computer. For some types of BIOS, you can do this directly by enabling Force Update ESCD (Reset Configuration Data etc.) in the PnP & PCI Configurations menu. This will cause the IRQ, DMA, and I/O resources to be redistributed.

User Manual


Technical support inquiry

We provide technical support only in Czech and English. Thank you for your understanding.