ADSA-1S6 USB 3.0 - 2.5" HDD SATA

USB 3.0 - SATA 6G adapter for fast connection of 2.5" SSD/HDD. Including case.


Input USB 3.0
Output SATA 6G, UASP
Device support 2.5" HDD / SSD
PC connection USB type A-M, disconnectable cable, cable 10 cm
design screwless mounting
Extra TRIM

Where to buy





A compact USB 3.0 adapter with case is designed for all 2.5" SATA SSDs and hard disks up to 9.5 mm height.
It deals with all SATA, SATA II and SATA III 2.5" drives without limiting maximum capacity.
The USB 3.0 interface guarantees seamless, high-speed connectivity to all existing computers.


USB 3.0 • ANY 7 & 9.5 mm 2.5" HDD/SSD • ANY CAPACITY


The actual SATA III/6G interface with UASP support allows you to enjoy the speed of modern SSD disks.
The UASP support significantly increases transmission rates especially when working with small files in the queue.
Supports TRIM feature to limit the gradual degradation of SSD performance over time.


USB 3.0 • SATA 6G • UASP


Disk installation only takes a few seconds.
Simply plug the disk directly into the SATA connector of the adapter.
The set can be connected to the PC immediately or inserted into a protective case before that.
No screws, just a few simple steps.


THE FASTEST & EASIEST ASSEMBLY • SCREWLESS


The case holds a standard 2.5" disk even with a USB adapter connected.
It also serves to transport or store the adapter itself without the disk, with a cable inside the case.
Minimum dimensions and weight make the product ideally suited also for occasional mobile use.


PRACTICAL CASE • MINI & LIGHTWEIGHT • MOBILE


Pure minimalist design of slim and lightweight body.
Pleasantly matte surface finish.
The delicate blue LED indicates power and data transmission.


PURE DESIGN • SLIM CASE • MATTE FINISH • DELICATE BLUE LED


Reading of S.M.A.R.T. information monitoring the condition of the external disk.
Supports turning off the disk after removing the device or spinning down the PC.
You can boot your computer from an SSD or hard drive in the external box.


HDD S.M.A.R.T. INFO • HDD TURN OFF • BOOT SUPPORT



AXAGON SLIMport 6 is a small but very fast and handy helper usable in many ways such as data storage and sharing, backup, disk testing, and more.
It is an ideal tool for data migration when replacing the hard drive with a solid state drive disk in your laptop.
The installation can be handled even by a layman - the disk connects to the adapter and the adapter to the computer's USB port; the rest is done automatically.


HANDY TOOL • DATA MIGRATION • AUTO INSTALL


A compact AXAGON ADSA-1S6 SLIMport6 high-speed adapter with USB 3.0 and SATA 6G interface intended for easy connection of SSD or 2.5" SATA disk.

A handy tool to quickly connect a SSD or laptop disk, including boot support.

The UASP support significantly increases transmission rates especially when working with small files in the queue.

The TRIM feature support limits the gradual degradation of SSD performance over time.

Reading of S.M.A.R.T. information monitoring the condition of the connected disks. Supports spinning down of connected disks as well as an adapter.

The installation can be handled even by a layman - the disk connects to the adapter and the adapter to the computer's USB port; the rest is done automatically.

Minimum dimensions and weight, along with an enclosed disc case, make the product ideally suited even for mobile use.

Features:
• Compatible with USB 3.0 and backward compatible with USB 2.0.
• Supports transmission rates 12 / 480 / 5000 Mb/s (low / full / high speed).
• Supports 2.5" SATA III / II / I disks of all capacities.
• Compliant with Serial ATA 3.1 specification (SATA/600), transmission rates of up to 6 Gb/s.
• Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s).
• Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s).
• The total bandwidth / transmission rate of the adapter is determined by the USB 3.0 interface used (theor. 5 Gbit/s).
• Supports UASP (USB Attached SCSI Protocol) and BOT (Bulk-Only Transport).
• Supports booting from SSD/HDD connected via an USB adapter.
• HDD Auto Spindown - automatic spindown of a disk after period of inactivity lasting 22 minutes.
• HDD Turn Off - turns off the disk after removing the device or spinning down the PC.
• Possibility to connect your device while running thanks to the Hot Plug support.
• Full Plug and Play support.
• Connection via USB 3.0 micro B female connector.
• USB 3.0 cable USB 3.0 Type A male / USB 3.0 Type B male 10 cm long is included.
• Supplying the power via USB 3.0 bus up to 900mA from one USB port is sufficient in all cases.
• A blue LED indicating the connection to the computer's USB port (permanent light) and data transmission (blinking).
• Compact adapter dimensions 70 x 21 x 10 mm.
• Adapter weight only 11 g, weight of USB cable 18 g.
• Simple plastic case holds 2.5" disk max. 9.5 mm high with USB adapter connected (USB cable is led out through hole in the case).
• For thin 7mm SSDs/HDDs foam pads are included for better fit in the case.
• The case can also serve to transport or store the adapter itself without the disk, with the USB cable inside the case.
• Case dimensions 122 x 78 x 19 mm.
• Case weight 40 g.

Supported OSs:
• MS Windows XP / Vista / 7 / 8 / 8.1 / 10 and later, Windows Server 2003 / 2008 / 2012 / 2016 and later (supported are all 32- and 64-bit Windows OS versions), Mac OS X 10.x and higher, Linux with kernel 2.6.x and above.
• Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available. 

Package contains:
• USB 3.0 - SATA 6G adapter,
• USB 3.0 cable 10 cm,
• plastic case for 2.5" disk and USB adapter,
• foam pads for 7 mm HDDs and SSDs,
• Packed in a cardboard box with the installation procedure included.

Input
interface USB 3.0 / USB 2.0 / USB 1.1
rate 5000 / 480 / 12 Mbit/s (super / high / full speed)
connector USB 3.0 Micro B female (on the USB adapter)
connector USB Type A male (on the cable)
cable 10 cm, disconnectable
Output
interface Serial ATA 3.1
rate 6 / 3 / 1.5 Gbit/s (SATA III / SATA II / SATA I)
connector 22-pin SATA data and power female
compatibility all SATA I / SATA II / SATA III disks
total permeability 5 Gbit/s theoretically (given by USB 3.0 input)
Supported device
2.5" yes (SATA HDD/SSD)
3.5" no
5.25" no
max. disk capacity all, without limitations
max. height of 2.5" disk 9.5 mm (in the case) / no limit (without the case)
Supported features
UASP yes
TRIM yes
S.M.A.R.T. yes
boot from connected disk yes
putting disk to sleep yes (HDD Auto Spindown / 22 min)
disk turning off yes (HDD Turn Off)
automatic installation yes
Plug and Play yes
Hot Plug yes
Other features
design plastic
screwless mounting yes
indication blue LED - connection to the USB port of the computer (permanently on), data transmission (flashes)
dimensions 122 x 78 x 19 mm
weight 40 g (without USB cable)
Power supply
on the bus yes (USB bus power)
through power adapter no
OS support
MS Windows 10 / 8.1 / 8 / 7 / Vista / XP (all 32- and 64-bit versions)
MS Windows Server 2016 / 2012 / 2008 / 2003 (all 32- and 64-bit versions)
Mac OS X 10.x and higher
Linux kernel 2.6.x and higher

Package contents

- USB 3.0 - SATA adapter
- USB 3.0 cable 10 cm
- self-adhesive foam pads for 7 mm HDDs and SSDs
- plastic case
- installation procedure specified on the packaging


Cable

USB 3.0 Type A male / USB 3.0 micro B male cable 10 cm


Product package

- cardboard box
- package dimensions 13 x 17.7 x 4 cm
- weight of 1 pc package 139 g
- EAN 8595247903075


Export package

- number of pieces in the box: 40
- total weight of the box: 6.3 kg G.W.
- box dimensions: 29 x 38 x 42 cm


FAQ

A): Drivers are included with operating systems and are installed completely automatically. The external box (adapter / docking station) is detected as a standard storage device, such as a USB flash disk, no additional drivers are needed.

B): No other drivers need to be installed and are not even available. If you continue to have problems with your external box (adapter / docking station), check out more tips that can help you troubleshoot problems.

A): If the external box (adapter / docking station) is not displayed in "Device Manager", there may be a USB port malfunction. It is also possible that your computer has a poor power supply to USB ports and the power is not sufficient to operate an external box (you can detect by listening that HDD is not spinning). This is a problem especially for older computers, where the source part already works at the limit of its parameters. In this case, it would help to use a USB hub, with an auxiliary power supply, by which the external box (adapter / docking station) would be connected to the computer.

B): Try plugging the external box (adapter / docking station) into another USB port, preferably on the back of your PC. The external box (adapter / docking station) should be detected and the drivers loaded automatically. If the problem persists, plug the external box (adapter / docking station) into the USB port of another computer to verify its functionality.

A): If this happens, it means that the operating system failed to get the necessary information to install the drivers.

B): The cause may be a defective USB cable or damaged device. If the problem persists, plug the external box (adapter / docking station) into the USB port of another computer to verify its functionality.

A): If this happens, it means that the Windows operating system did not assign a drive letter to the new storage device.

B): If the drive letter is not assigned, open "Disk Management", right-click on the desired drive and manually assign the drive letter. If the drive letter can not be assigned to the disk, it is possible that the disk is formatted as "dynamic". If you want to keep disk data, connect it to the original device and make a backup of the disk. Then convert it to a normal disk, initialize it to MBR (or GPT, see other points), and then perform Low Level Format (e.g. using the Low Level Format Tool)

A): The newly purchased disk must be initialized before first use.

B): If the new disk is not initialized automatically, open "Disk Management", right-click on the desired disk and initialize it.

A): By initializing the disk, you can set the mode in which the hard disk will work.

B): You can use the partition with the master boot record (MBR) or the GUID partition table (GPT). For disk up to 2TB, use the MBR option, we recommend selecting GPT on a larger disk than 2TB. Subsequently, the initialized disk should be formatted.

A): If the external box (adapter / docking station) with a 3.5“ HDD is not displayed in "Device Manager ", the inserted disk may not be powered.

B): Make sure you have the power supply plugged in and the external box (adapter / docking station) turned on with the power switch. If the disk is properly powered, it should spin (can be detected by listening).

A): The AXAGON external boxes (adapters / docking stations) are always equipped with the latest firmware to support disks of all capacities.

B): The 2TB limit is given as the maximum partition size when initializing a disk with the master boot record (MBR). If you want to create a larger partition on the HDD stored in the external box (e.g. 3TB or more), you must select the GUID partition table (GPT) when initializing the disk. Subsequently, the initialized disk should be formatted.

A): The external AXAGON boxes (adapters / docking stations) support the USB Mass Storage protocol making it easy to connect to TV.

B): When using a disk larger than 2TB, some TVs do not support GPT format. In such case, MBR format must be used when initializing a disk.

A): The connectors are compatible, but inside the USB 3.0 connector has five more contacts. The USB 3.0 connector is usually identified by the use of blue (exceptionally black) plastic.

B): The main difference is the speed of data transmission. USB 2.0 reaches a maximum speed of about 30 MB/s, while USB 3.0 is able to achieve a theoretical speed of up to 600 MB/s. If you place a disk in the external box that has a read speed of 120 MB/s, you can only get a quarter speed, that is about 30 MB/s, in the box with USB 2.0.

A): For proper spin-down setting, this feature must be supported by all components that are in the path between the operating system and the HDD, i.e. the USB controller, box electronics, and the disk itself. The spinning down of idle disks is set up by the operating system, but it is very complicated.

B): We recommend setting up using one of the freeware programs, where the procedure is mostly simplified. E.g. by HDDScan (http://hddscan.com/). The program has the ability to verify whether the disk and all components in the path support the feature. Select "Spindown" to test an immediate spin down of the disk. Set up the spindown time using a slider in the "Power Management" section.



Technical support inquiry