CRE-S2N SuperSpeed USB-A CARD READER

Slim super-speed USB 3.2 Gen 1 card reader with a direct USB-A connector.

Product code: CRE-S2N

Category: Card readers , Memory card readers , All Products

Slim USB 3.2 Gen 1 Memory Card Reader AXAGON CRE-S2N SUPERSPEED supports all current versions of SD and microSD cards including SDXC and microSDXC with capacity up to 2TB.

With USB 3.2 Gen 1 (USB 3.0) interface, the reader achieves significantly higher data rates for UHS-I SD cards compared to USB 2.0 interface readers.

The card reader allows simultaneous handling of cards in both slots and direct copying between them.

The slim body of the reader does not prevent the use of secondary USB ports on the computer. Card reader matte surface limits the creation of fingerprints.

The installation is very easy - only plug the reader into the computer USB port and the rest is done automatically.

Card reader - two slots, supports the following formats:
• Micro SD slot: microSD / microSDHC / microSDXC / TransFlash,
• SD slot: Secure Digital, SDHC, SDXC, MultiMedia Card, MMC 4.0, MMC Dual Voltage, MMC mobile, RS-MMC, with miniSD, MMC Micro adapter.

The reader supports the following flash card specifications:
• SD 1.0 / 1.1 (SD - Secure Digital, up to 2GB).
• SD 2.0 (SDHC - Secure Digital High Capacity, up to 32GB).
• SD 3.0 (SDXC - Secure Digital eXtended Capacity, up to 2TB).
• MMC and eMMC 3.x/4.0/4.1/4.2/4.3/4.4/4.5/5.0 (8-bit).
• Support for SD 3.01 and SD Jukebox applications (CPRM functions).
• Ultra High Speed UHS-I support (SDR12/SDR25/SDR50/DDR50/SDR104) speeds up to 104 MB/s.
• Supports ECC (Error Correction Code) function and CRC (Cyclic Redundancy Check) function.
• 2 LUN - in file managers, the reader is indicated as two disk drives.
• FAT 12/16/32, NTFS, exFAT (FAT 64) file formats support.

Other features:
• SuperSpeed USB - USB 3.2 Gen 1 interface (before USB 3.1 Gen 1 / USB 3.0).
• Also compatible with USB 3.2 Gen 2, backward compatible with USB 2.0 and USB 1.1.
• Supports transmission rates 12 / 480 / 5000 Mbit/s (full / high / super speed).
• Full Plug and Play and Hot Swap support.
• Connects via USB type A male connector.
• Support for connection of phones with microUSB connector via OTG adapter.
• USB-bus card reader power supply.
• A blue LED indicating the connection to the computer's USB port (permanent light) and data transfer (blinking).
• Dimensions 68 x 21 x 10.
• Weight 11 g.

Supported Operating Systems:
• MS Windows XP / Vista / 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2003 / 2008 / 2012 / 2016 and later (all 32- and 64-bit Windows versions supported), Mac OS X 10.x and higher Linux with 2.4.x kernel and higher, Android all versions.
• Note: Drivers are included with supported operating systems and will be installed automatically. No other drivers need to be installed and are not even available.

Package contains:
• SuperSpeed USB card reader,
• USB connector cap,
• packed in a cardboard box with a hanging hole.

PACKAGE CONTENTS

- USB-A card reader
- USB connector cap
- installation procedure specified on the packaging

PRODUCT PACKAGE

- blister stuck between paper cards
- package dimensions 15 x 11,5 x 0.75 cm
- weight of 1 pc package 26 g
- EAN 8595247906137

EXPORT PACKAGE

- number of pieces in the box: 250
- total weight of the box: 7.55 kg G.W.
- box dimensions: 46 x 30 x 25 cm

Where can I download drivers to my card reader?

A): Drivers are included with operating systems and are installed completely automatically. The card reader is detected as a standard storage device, such as a USB flash disk, no other drivers are available.

B): No other drivers need to be installed and are not even available. If you continue to have problems with your reader, check out more tips that can help you troubleshoot problems.

The card reader is not displayed in "Device Manager".

A): If the card reader is not displayed in "Device Manager," there may be a USB port (or a 20-pin USB 3.0 connector on the PC motherboard in the case of an internal reader) malfunction.

B): Try plugging the reader into another USB port (or another 20-pin USB 3.0 connector on the PC motherboard, if available, in the case of an internal reader). The card reader should be detected and the drivers loaded automatically. If this does not solve the problem, try checking the USB controller status in "Device Manager" in the "USB Drivers" section. If the problem persists, plug the card reader into the USB port of another computer to verify its functionality.

The card reader is reported in "Device Manager" as "Unknown Device".

A): If this happens, it means that the operating system failed to get the necessary information to install the drivers.

B): The cause may be a defective USB cable or damaged device. Another option is to remove the record of the connected USB device using "USBDeview". After connecting the reader, the drivers should be reloaded. If the problem is caused by a driver error, the problem should be eliminated. If the problem persists, plug the card reader into the USB port of another computer to verify its functionality.

The reader is not displayed in the "My Computer" folder.

A): If this happens, it means that the Windows operating system did not assign a drive letter to the new storage device.

B): If the drive letter is not assigned, open "Disk Management", right-click on the desired drive and manually assign the drive letter. Another option is that the correct formatting of the memory card is not performed. Format the card in "Disk Management" or in the device on which you are using the card (for example, the camera).

How to install the cardreader

Installation of the Axagon Smard Card reader is fully automatic, just plug it into a PC, the drivers are included in the operating systems. Information about requirements, installation of Electronic ID (eID) application/service you will find on your national eID provider website or government website.