Handy four-port USB 2.0 hub with a permanently connected USB cable. White.

Input USB 2.0
Output USB 2.0, 4-port output
PC connection USB type A-M, permanently connected cable, cable 20 cm
Power supply on the bus

Where to buy

Four-port AXAGON HUE-X4 USB 2.0 READY hub with permanently connected USB cable.

Thanks to a direct USB connector on a short cable, it is always ready to use.

Two USB ports positioned on the sides of the hub for trouble-free connection of any USB device with a large volume of mass around the connector.

Compact and lightweight hub with permanently attached flexible USB cable is a handy helper both at home and while traveling.

• 4x downstream USB 2.0 port, 1x upstream USB 2.0 port with Type A male connector attached on a 20 cm long cable.
• Fully compatible with USB 2.0 and backward compatible with USB 1.1.
• Supported transmission rates 1.5 / 12 / 480 Mb/s (low / full / high speed).
• Full Plug and Play and Hot Plug support.
• Allows up to 127 USB devices to be connected by cascading.
• Power supply via USB - bus-power mode (5V - 500mA).
• Current overload detection and protection.
• LED to indicate power supply connection.
• Dimensions 78 x 34 x 14 mm, weight 32 g (incl. USB cable).

OS support:
• MS Windows XP / Vista / 7 / 8 / 8.1 / 10 and later, Windows Server 2003 / 2008 / 2012 / 2016 and later (supported are all 32- and 64-bit Windows OS versions), Mac OS X 10.4.x and higher, Linux with kernel 2.6.x and above.
• Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available. 

Package contains:
• USB 2.0 hub with permanently connected 20 cm long cable,
• packed in a double-sided heat sealed blister with clearly indicated parameters and installation procedure.

interface USB 2.0 / USB 1.1
rate 480 / 12 / 1.5 Mbit/s (high / full / low speed)
connector USB Type A male on the cable
cable 20 cm, permanently connected
interface USB 2.0
number of ports 4
connector USB Type A female
Supported features
overload protection yes
automatic installation yes
Plug and Play yes
Hot Plug yes
Other features
indication green LED - connection to the power supply (permanently on)
dimensions 78 x 34 x 14 mm
weight 32 g (incl. USB cable)
Power supply
on the bus yes (USB bus power)
through power adapter no
OS support
MS Windows 10 / 8.1 / 8 / 7 / Vista / XP (all 32- and 64-bit versions)
MS Windows Server 2016 / 2012 / 2008 / 2003 (all 32- and 64-bit versions)
Mac OS X 10.x and higher
Linux kernel 2.6.x and higher

Package contents

- USB hub with a permanently connected 20 cm cable
- installation procedure specified on the packaging

Product package

- double-sided blister sealed along the perimeter
- package dimensions 18.3 x 12.5 x 2.3 cm
- weight of 1 pc package 67 g
- EAN 8595247902139

Export package

- number of pieces in the box: 100
- total weight of the box: 7.85 kg G.W.
- box dimensions: 28.5 x 38.5 x 47.5 cm


A): The necessary drivers are already included in all operating systems and install completely automatically, and no additional drivers are needed.

B): Plug the USB hub into another USB port (on the back of the computer where the USB ports are integrated directly into the motherboard). It should re-detect the USB hub and reinstall the drivers. Alternatively, try replacing the USB cable. The obsolete driver of the USB controller could also cause problems. Manufacturers of USB 3.0 chipsets often issue new versions of drivers to improve compatibility with different devices. If the problem with the USB bub persists, plug it into the USB port of another computer to verify its functionality.

A): The phone / tablet cannot be powered by an OTG cable, this is given by the OTG principles. The tablet can be connected to a charger by a normal cable and charged itself or devices can be connected to it with an OTG cable

B): Phones / tablets that have a power connector located outside the microUSB have an advantage - here the tablet can be powered through a round connector and connect other peripherals (mouse, keyboard, flash disk, etc.) to the microUSB using an OTG cable (via the USB hub).

A): In the vast majority of cases, the USB hub can handle connection of one 2.5" external box. If more external boxes are connected, a higher current is needed that ordinary USB cannot deliver.

B): In this case, an auxiliary power supply is required. Use a USB hub with auxiliary power supply.

A): You can use a passive USB cable to connect a USB hub to your computer. However, with longer cables the USB hub may not work reliably.

B): In this case, we recommend using an active extension USB repeater cable, such as AXAGON ADR-205 or ADR-210.

Technical support inquiry

We provide technical support only in Czech and English. Thank you for your understanding.