RVD-VG DP > VGA adapter

An active converter to connect VGA viewer to a PC with a DisplayPort output.


Input DisplayPort
Output VGA
Device support up to 1920 x 1200
PC connection DP M, permanently connected cable, cable 10 cm
Power supply on the bus
design gold-plated connectors

Where to buy





DisplayPort -> VGA active adapter AXAGON RVD-VG to connect an older VGA monitor/TV/data projector to the computer with the DisplayPort output.

The hardware converter without the need for any installation or setup ensures high-quality transfer of image at FullHD resolution, or 1920x1200.

The reduction is only one-way, i.e. the converter from DisplayPort to VGA, not vice versa. The reduction does not include an audio output.

Input:
• DisplayPort v1.2 digital interface
• DP male connector with latch (M)
• connector latch control button

Output:
• analog VGA interface
• D-Sub 15-pin (F) female connector
• nuts for securing the VGA cable

Supported resolutions:
• max. 1920 x 1200 (16:10) WUXGA
• 1920 x 1080 (16:9) Full HD/1080p
• 1680 x 1050 (16:10) WSXGA+
• 1600 x 1200 (4:3) UXGA
• 1600 x 900 (16:9) HD+
• 1440 x 900 (16:10) WXGA+
• 1400 x 1050 (4:3) SXGA+
• 1366 x 768 (16:9) WXGA
• 1360 x 768
• 1280 x 1024 (5:4) SXGA
• 1280 x 960 (4:3) SXGA-
• 1280 x 800 (16:10) WXGA
• 1280 x 768 (5:3) WXGA
• 1280 x 720 (16:9) HD/WXGA/720p
• 1280 x 600
• 1152 x 864 (4:3) XGA+
• 1024 x 768 (4:3) XGA
• 800 x 600 (4:3) SVGA
• 640 x 480 (4:3) VGA
• 576i/576p PAL
• 480i/480p NTSC
* the resolution will depend on parameters of monitor/TV/projector and graphics adapter.

Other features:
• supported frequencies 25 MHz – 270 MHz (depending on the input device),
• supported modes: mirroring the primary monitor area (default setting), expanding the primary monitor area,
• DDC (Display Data Channel) support - Intelligent setting of resolution, frequency and other parameters according to the source graphics chip,
• EDID (Extended display identification data) support - to identify the monitor capabilities and supported graphics modes,
• MCCS (Monitor Control Command Set) support - specific commands to control the monitors,
• power supply from the DisplayPort input - no external power is needed,
• gold-plated connectors for perfect contact and oxidation limitation,
• discrete white LED indicating power on,
• an Analogix ANX9833 chip is used,
• dimensions 45 x 47 x 16 mm,
• total length of the cable, incl. connector, is 240 mm,
• weight only 36 g,
• operating temperature: 0 ~ 40°C,
• storage temperature: -10 ~ +85 °C,

Supported operating systems:
• All versions of MS Windows, Mac OS X, Linux and other operating systems.
• It is a pure hardware converter, the transfer is provided only by a chip of the adapter without computer participation, no drivers are installed, so the compatibility is not dependent on the operating system used.

Package contains:
• DisplayPort > VGA converter,
• packed in a cardboard box.

Input
interface DisplayPort v1.2
connector DP male on the cable
cable 10 cm, permanently connected
Output
interface VGA
connector D-Sub 15-pin female
Supported features
max. resolution 1920 x 1200 WUXGA
automatic installation yes
sound transmission no
display modes mirroring / extending the primary monitor area
energy saving yes (computer- and display-controlled sleeping)
Display Data Channel yes (DDC - automatic setting of monitor parameters according to the graphic chip)
Plug and Play yes
Hot Plug yes
Other features
gold-plated connectors yes
indication white LED - connection to power supply (permanently on)
chipset Analogix ANX9833
dimensions 45 x 47 x 16 mm
weight 36 g
Power supply
on the bus yes (DP bus power)
OS support
MS Windows all versions
MS Windows Server all versions
Mac OS all versions
Linux all versions

Package contents

- DisplayPort > VGA adapter
- The manual is not necessary - the converter connects and works immediately, nothing needs to be installed


Product package

- a cardboard box with an option to be hanged on the retail display stands
- package dimensions 14 x 8.8 x 3.6 cm
- weight of 1 pc package 72g
- EAN 8595247903914


Export package

- number of pieces in the box: 100
- total weight of the box: 7.8 kg G.W.
- box dimensions: 45 x 35 x 38 cm


Datasheet



Technical support inquiry