RVH-VG2 HDMI > VGA adapter

Quickly and easily resolves the problem of connecting an older VGA monitor / data projector to a computer with an HDMI output.
Thanks to the built-in microUSB connector for additional power, it is not a problem to connect devices with a lower power supply to the HDMI output such as Raspberry Pi, Apple TV or some Smart TV boxes. When connecting to a desktop PC or laptop, additional power is not needed.

HDMI INPUT • VGA OUTPUT • microUSB POWER CONNECTOR

The hardware converter without the need for any installation or setup ensures high-quality transfer of image up to Full HD/1080p 1920x1080 resolution at 60 Hz. The adapter also supports all lower resolutions.
Both mirroring and extension of the primary monitor area are supported.

FULL HD/1080p max. • Mirrored Desktop • Extended Desktop

Connect the converter's HDMI input connector directly to the computer.
Connect a VGA cable from the monitor or projector to the VGA output connector of the converter, and secure the connection to the converter with the screws on the cable.
When the computer is turned on, the converter is immediately operational; no drivers need to be installed.
Turn on the viewer and, if necessary, set the input to VGA or D-SUB.
The image appears on the viewer.
If necessary, connect additional power to the microUSB connector of the converter. The power supply is not included, but any idle mobile phone charger with an USB output can be used.

The AXAGON RVH-VG2 HDMI -> VGA active adapter to connect an older VGA monitor / data projector to a computer with a HDMI output.

The hardware converter without the need for any installation or setup ensures high-quality transfer of image up to Full HD 1920x1080 resolution at 60 Hz.

The reduction is only one-way, i.e. the converter from HDMI to VGA, not vice versa. The reduction does not include an audio output.

Thanks to the built-in microUSB connector for additional power, it is not a problem to connect devices with a lower power supply to the HDMI output such as Raspberry Pi, Apple TV or some Smart TV boxes. When connecting to a desktop PC or laptop, additional power is not needed.

Input:
• digital HDMI v1.4b interface
• HDMI A (M) male connector

Output:
• analog VGA interface
• D-Sub 15-pin (F) female connector
• nuts for securing the VGA cable

Supported resolutions:
• max. 1920 x 1080 (16:9) Full HD/1080p
• 1680 x 1050 (16:10) WSXGA+
• 1600 x 1200 (4:3) UXGA
• 1600 x 900 (16:9) HD+
• 1440 x 900 (16:10) WXGA+
• 1400 x 1050 (4:3) SXGA+
• 1366 x 768 (16:9) WXGA
• 1360 x 768
• 1280 x 1024 (5:4) SXGA
• 1280 x 960 (4:3) SXGA-
• 1280 x 800 (16:10) WXGA
• 1280 x 768 (5:3) WXGA
• 1280 x 720 (16:9) HD/WXGA/720p
• 1280 x 600
• 1152 x 864 (4:3) XGA+
• 1024 x 768 (4:3) XGA
• 800 x 600 (4:3) SVGA
• 640 x 480 (4:3) VGA
• 576i/576p PAL
• 480i/480p NTSC

Other features:
• supported rates 25 MHz – 165 MHz (depending on the input device),
• support for HDCP to prevent copying video and audio content,
• conversion from YCC422 to YCC444,
• supported modes: mirroring the primary monitor area (default setting), expanding the primary monitor area,
• power supply from the HDMI input - no external power is needed,
• possibility of additional power supply via microUSB connector if the power level from HDMI output is lower than the standard level,
• gold-plated connectors for perfect contact and oxidation limitation,
• the decent white LED indicating the power connection,
• Explore-Semi EP94Z1E chip is used,
• compact dimensions 45 x 47 x 16 mm,
• weight 34 g,
• permanently connected cable ca 10 cm,
• working temperature: 0 ~ 40°C,
• storage temperature: -10 ~ +85°C.

Supported OSs:
• All versions of MS Windows, Mac OS, Linux and other operating systems.
• It is a pure hardware converter, the transfer is provided only by a chip of the adapter without computer participation, no drivers are installed, so the compatibility is not dependent on the operating system used.

Package contains:
• HDMI > VGA converter,
• packed in a cardboard box.