RVH-VGA HDMI > VGA adapter

Quickly and easily resolves the problem of connecting an older VGA monitor / data projector to a computer with an HDMI output.
The converter also includes a stereo output for connecting headphones or active speakers.
Thanks to the built-in microUSB connector for additional power, it is not a problem to connect devices with a lower power supply to the HDMI output such as Raspberry Pi, Apple TV or some Smart TV boxes. When connecting to a desktop PC or laptop, additional power is not needed.

HDMI INPUT • VGA OUTPUT • AUDIO OUT • microUSB POWER CONNECTOR
 

The hardware converter without the need for any installation or setup ensures high-quality transfer of image up to Full HD/1080p 1920x1080 resolution at 60 Hz. The adapter also supports all lower resolutions.
Both mirroring and extension of the primary monitor area are supported.

FULL HD/1080p max. • Mirrored Desktop • Extended Desktop
 

Connect the converter's HDMI input connector directly to the computer.
Connect a VGA cable from the monitor or projector to the VGA output connector of the converter, and secure the connection to the converter with the screws on the cable.
When the computer is turned on, the converter is immediately operational; no drivers need to be installed.
Turn on the viewer and, if necessary, set the input to VGA or D-SUB.
The image appears on the viewer.
To use the audio output, set the HDMI output as the default sound playback device (or install audio drivers for the graphics card of your computer).
If necessary, connect additional power to the microUSB connector of the converter. The power supply is not included, but any idle mobile phone charger with an USB output can be used.
 

The AXAGON RVH-VGA HDMI -> VGA active adapter to connect an older VGA monitor / data projector to a computer with a HDMI output.

The hardware converter without the need for any installation or setup ensures high-quality transfer of image up to Full HD resolution 1920x1080.

The reduction is only one-way, i.e. the converter from HDMI to VGA, not vice versa.

The converter includes a stereo output for connecting headphones or active speakers.

Thanks to the built-in microUSB connector for additional power, it is not a problem to connect devices with a lower power supply to the HDMI output such as Raspberry Pi, Apple TV or some Smart TV boxes. When connecting to a desktop PC or laptop, additional power is not needed.

Input:
• Digital HDMI v1.4b interface.
• HDMI A (M) male connector.

Output:
• Analog VGA interface,
• D-Sub 15-pin (F) female connector,
• Nuts for securing the VGA cable,
• 2-channel analog 16 / 24-bit output (3.5 mm stereo jack): stereo output for headphones or active speakers.

Parameters of D/A audio converter:
• Sampling rate up to 200 kHz, 24 bit.
• Signal-to-Noise ratio (Output SNR) ≥ 95 dB.
• Harmonic distortion (Output THD + N) ≤ -85dB.

Supported resolutions:
• max. 1920 x 1080 (16:9) Full HD/1080p
• 1680 x 1050 (16:10) WSXGA+
• 1600 x 1200 (4:3) UXGA
• 1600 x 900 (16:9) HD+
• 1440 x 900 (16:10) WXGA+
• 1400 x 1050 (4:3) SXGA+
• 1366 x 768 (16:9) WXGA
• 1360 x 768
• 1280 x 1024 (5:4) SXGA
• 1280 x 960 (4:3) SXGA-
• 1280 x 800 (16:10) WXGA
• 1280 x 768 (5:3) WXGA
• 1280 x 720 (16:9) HD/WXGA/720p
• 1280 x 600
• 1152 x 864 (4:3) XGA+
• 1024 x 768 (4:3) XGA
• 800 x 600 (4:3) SVGA
• 640 x 480 (4:3) VGA
• 576i/576p PAL
• 480i/480p NTSC

Other features:
• Supported rates 25 MHz – 165 MHz (depending on the input device).
• Support for HDCP to prevent copying video and audio content.
• Conversion from YCC422 to YCC444.
• Supported modes: mirroring the primary monitor area (default setting), expanding the primary monitor area.
• Power supply from the HDMI input - no external power is needed.
• Possibility of additional power supply via microUSB connector if the power level from HDMI output is lower than the standard level.
• Gold-plated connectors for perfect contact and oxidation limitation.
• The decent white LED indicating the power connection.
• Explore-Semi EP94Z1E chip (HDMI - VGA converter) + Everest-Semi ES7144LV chip (stereo D/A converter) is used.
• Compact dimensions 45 x 47 x 16 mm.
• Weight 35 g.
• Permanently connected cable ca 10 cm.
• Working temperature: 0 ~ 40°C.
• Storage temperature: -10 ~ +85°C.

Supported OSs:
• All versions of MS Windows, Mac OS, Linux and other operating systems.
• It is a pure hardware converter, the transfer is provided only by a chip of the adapter without computer participation, no drivers are installed, so the compatibility is not dependent on the operating system used.

Package contains:
• HDMI > VGA converter,
• packed in a cardboard box.