PWB-L10 10.000 power bank

Compact AXAGON PWB-L10 10,000 mAh power bank with two outputs, a Li-polymer cell, LCD display, and modern metal shell design.

Two outputs allow charging of two devices at the same time. Fast charging of connected devices (output up to 2.4A) as well as external battery (input up to 2A).

The modern Li-polymer cells used are thinner, more durable and safer than conventional Li-Ion cells, and also contribute to an excellent charging efficiency of around 90 %.

With the built-in LCD display, you can quickly and accurately detect the battery charge level when charging the power bank or connected device.

Intelligent electronic six-fold protection of battery cells from all adverse effects helps to protect both the device being charged and the power bank itself.

Durable compact body with a nice, matte finish to prevent unwanted fingerprints.

Charging of tablets, smartphones, cameras, navigation, game consoles, and other devices that support power supply from the USB port is easier now than it ever has been.

External battery features:
• Li-pol battery with a capacity of 10,000 mAh / 3.7 V, i.e. 37 Wh.
• Input with micro USB 5pin connector, 5V DC / 2A.
• Two outputs 5V DC / 2.4A and 1A with USB Type A connectors for charging two devices at one time.
• A lifetime minimum of 500 charging cycles (at least 80 % of the original capacity).
• Projected lifetime of 700 charging cycles (when the battery usage conditions are met).

External battery control electronics functions:
• Overload protection.
• Short circuit protection.
• Protection against voltage spikes.
• Protection against excessive discharging.
• Protection against overcharging.
• Protection against overheating.
• Automatic switching on of the power bank after connecting a charging device for comfortable operation.
• Automatic switching off of the power bank after 30s of being idle in order to save stored energy.

Typical charging time of a fully discharged external battery:
• approx. 5:20 hours from a network-based USB charger with min 2A output (not included).

Indications:
• The LCD display accurately displays the power bank's battery charge level as a percentage.
• The switched-off power bank when the button is pressed shows the current battery charge level 0 to 100 percent on the LCD display.
• When charging the power bank, the current battery level 0 to 100 percent flashes on the display.
• When charging the device from power bank, the display always shows the current battery charge level 0 to 100 percent.
• When charging is complete, the LCD display will go out after 30 seconds.

Other features:
• The aluminum body is firmly attached to the fronts made of durable ABS plastic.
• The matte surface of the aluminum body reduces fingerprinting.
• Dimensions: 126 x 67 x 17 mm.
• Weight: 238 g.
• Working temperature: +5 ~ +35 °C.
• Storage temperature: -20 ~ +50 °C.
• Humidity: 20 ~ 85 %.

Package contains:
• 10,000 mAh power bank,
• USB type A / micro USB 5pin power cable 20 cm long,
• multilingual manual ENG/CZ/DE/ESP/FR/HU/IT/PL/RO/RU/SK/BG,
• packed in a cardboard box.

Notice: The actual (physical) cell capacity of this battery is 10,000mAh. However, no external battery can transfer all the energy into the battery of a mobile device without losses. In power transmission, losses occur inside the voltage converter from 3.7 V to 5 V, on the transient resistances of contacts, due to lower efficiency of energy storage in the battery of the charged device, temperature conditions, higher charging current, and the like. The actual efficiency of this battery is around 90 % at a 1A discharge current, depending on the specified conditions.