RVH-VGAM HDMI > VGA adapter

HDMI -> VGA active mini adapter AXAGON RVH-VGAM with an audio output to connect an older VGA monitor/TV/data projector to the computer with the HDMI output.

The hardware converter without the need for any installation or setup ensures high-quality transfer of image at FullHD resolution 1920x1080.

The reduction is only one-way, i.e. the converter from HDMI to VGA, not vice versa.

The converter includes a stereo output for connecting headphones or active speakers.

Thanks to the built-in microUSB connector to supply additional power, it is not a problem to connect devices with a lower power supply to the HDMI output such as Raspberry Pi, Apple TV, some Smart TV boxes and others. When connecting to a desktop PC or a notebook, additional power is not needed.

Thanks to an audio connector installed on the adapter rear side, the audio cable does not prevent from using other notebook´s ports, as is the case for adapters with the connector located on the adapter´s lateral side.

Input:
• HDMI v1.4 digital interface
• HDMI A (M) male connector

Output:
• analog VGA interface
• D-Sub 15-pin (F) female connector
• 2-channel analog 16 / 24-bit output (3.5 mm stereo jack): stereo output for headphones or active speakers

Parameters of D/A audio converter:
• sampling rate up to 200 kHz, 24 bit
• signal-to-Noise ratio (SNR output) ≥ 105 dB
• harmonic distortion (THD + N output) ≤ -90 dB

Supported resolutions:
• max. 1920 x 1080 (16:9) Full HD/1080p
• 1680 x 1050 (16:10) WSXGA+
• 1600 x 1200 (4:3) UXGA
• 1600 x 900 (16:9) HD+
• 1440 x 900 (16:10) WXGA+
• 1400 x 1050 (4:3) SXGA+
• 1366 x 768 (16:9) WXGA
• 1360 x 768
• 1280 x 1024 (5:4) SXGA
• 1280 x 960 (4:3) SXGA-
• 1280 x 800 (16:10) WXGA
• 1280 x 768 (5:3) WXGA
• 1280 x 720 (16:9) HD/WXGA/720p
• 1280 x 600
• 1152 x 864 (4:3) XGA+
• 1024 x 768 (4:3) XGA
• 800 x 600 (4:3) SVGA
• 640 x 480 (4:3) VGA
• 576i/576p PAL
• 480i/480p NTSC

Other features:
• supported rates 25 MHz – 200 MHz (depending on the input device)
• YCC-to-RBG conversion supported
• support for HDCP to prevent copying video and audio content
• DDC (Display Data Channel) support - Intelligent setting of resolution, frequency and other parameters according to the source graphics chip
• EDID (Extended display identification data) support - to identify the monitor capabilities and supported graphics modes
• MCCS (Monitor Control Command Set) support - specific commands to control the monitors
• supported modes: mirroring the primary monitor area (default setting), expanding the primary monitor area
• power supply from HDMI inputs; if needed, an auxiliary power supply is ensured via microUSB
• possibility of additional power supply via microUSB connector if the power level from HDMI output is lower than the standard level
• gold-plated connectors for perfect contact and oxidation limitation
• a Chrontel CH7101B chip is used (HDMI-to-VGA convertor) + Cirrus Logic CS4344 (stereo D/A convertor)
• compact dimensions 47 x 23 x 23 mm
• weight 13 g
• length of the audio cable is 80 cm
• operating temperature: 0 ~ 40°C
• storage temperature: -10 ~ +85 °C

Supported operating systems:
• All versions of MS Windows, Mac OS X, Linux and other operating systems.
• It is a pure hardware converter, the transfer is provided only by a chip of the adapter without computer participation, no drivers are installed, so the compatibility is not dependent on the operating system used.

Package contains:
• HDMI > VGA converter,
• a connecting audio cable jack 3.5 mm / jack 3.5 mm,
• packed in a cardboard box.