ADR-215 USB repeater cable 15 m
Active extension USB 2.0 A-M > A-F cable, 15 m long. Power supply option.
| Input | USB 2.0 |
| Output | USB 2.0, USB type A-F |
| PC connection | cable 15 m, USB type A-M, permanently connected cable |
| Power supply | on the bus, through power adapter |
| design | active |
| Extra | shielded |
Where to buy
Active extension AXAGON ADR-215 USB 2.0 cable, 15 m long is ideal for connecting your computer to a USB device such as a mouse, keyboard, webcam, printer, scanner, plotter and others. The active USB repeater cable strengthens the passing signal and allows you to connect a significantly more distant USB device than the usual passive cable. The range of the cable can be further extended by using several cables in a row.
A great advantage of the ADR-215 extension is an integrated auxiliary power supply connector. In most cases, USB bus power is sufficient, but for devices with larger power consumption the USB power supply may be inadequate and auxiliary power from the mains may resolve the problem.
The remarkably compact body of the repeater cable allows trouble-free use in electrical installation strips or cable systems.
The use of a high quality shielded cable ensures high communication speed and minimal undesirable interference.
Input:
• USB 2.0 for connection to a computer
• USB Type A (M) male connector
Output:
• USB 2.0 for connecting a remote USB device
• USB Type A (F) female connector
• transmission rate 480 / 12 / 1.5 Mbit/s (high / full / low speed)
Power supply:
• Power supply of the cable and connected devices via USB bus (bus-power mode 5V - 500mA).
• For most connected USB devices, the power supply via USB bus is sufficient and no auxiliary power is required.
• The active part of the cable includes a connector (Ø 3.5 x 1.3 mm outer x internal diameter) for additional external power supply of 5V/ 1-2 A.
• The power cable USB A-M / 3.5mm jack, 1.2 m long is included. The cable allows powering from a standard mobile phone charger with USB-A output 5V / min. 1A, e.g. AXAGON ACU-DS16.
• When powering the repeater cable with the power adapter, an external 2.5" disk can be connected without the need for own power supply to the disk.
• For longer USB route with multiple repeater cables connected in a row, the USB bus supply may be inadequate for USB devices with lower power consumption than an external 2.5" drive. Also in this case it can help to boost the power supply by connecting a power adapter.
Other features:
• Fully compatible with USB 2.0 and backward compatible with USB 1.1.
• Full Plug and Play and Hot Plug support.
• Two LEDs indicating power and USB connection.
• Behind the active USB cable, a common passive USB cable can also be used.
• Dimensions of active part with are 74 x 22 x 13 mm, cable length 15 m.
• Weight 503 g.
Supported OS:
• MS Windows XP / Vista / 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2003 / 2008 / 2012 / 2016 / 2019 / 2022 and later (all 32- and 64-bit Windows versions supported), Mac OS X 10.x and higher Linux with 2.6.x kernel and higher.
• Note: Drivers are included with supported operating systems and will be installed automatically. No other drivers need to be installed and are not even available.
Package contains:
• USB 2.0 A-M > A-F active cable 15 m long,
• USB-A / 3.5 mm power cable,
• multilingual guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA,
• packed in a cardboard box.
| Input | |
| interface | USB 2.0 / USB 1.1 |
| rate | 1.5 / 12 / 480 Mbit/s (low / full / high speed) |
| connector | USB Type A male on the cable |
| cable | 15 m, permanently connected |
| Output | |
| interface | USB 2.0 |
| number of ports | 1 |
| connector | USB Type A female |
| Supported features | |
| overload protection | yes |
| automatic installation | yes |
| Plug and Play | yes |
| Hot Plug | yes |
| Other features | |
| design | active |
| shielding | yes |
| indication | green LED / LINK - USB device connection (permanently on) |
| indication | red LED / POWER - power supply connection (permanently on) |
| dimensions | 74 x 22 x 13 mm (active part) |
| weight | 503 g |
| Power supply | |
| on the bus | yes (USB bus power) |
| through power adapter | yes (possibility to connect power adapter) |
| OS support | |
| MS Windows | 11 / 10 / 8.1 / 8 / 7 (all 32- and 64-bit versions) |
| MS Windows Server | 2022 / 2019 / 2016 / 2012 / 2008 / 2003 (all 32- and 64-bit versions) |
| Mac OS | X 10.x and higher |
| Linux | kernel 2.6.x and higher |
PACKAGE CONTENTS
- USB 2.0 A-M > A-F active cable 15 m long
- USB-A / 3.5 mm power cable
- multilingual guide
MANUAL
- multilingual guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA
PRODUCT PACKAGE
- cardboard box
- package dimensions 172 x 152 x 81 mm
- weight of 1 pc package 645 g
- EAN 8595247902344
EXPORT PACKAGE
- number of pieces in the box: 20
- total weight of the box: 13.5 kg G.W.
- box dimensions: 41.5 x 36 x 33 cm
FAQ
A): The use of other cables with ADR cables is not recommended because there is a greater voltage drop on them and there may be communication failures.
B): Only when it is absolutely necessary (such as when connecting a printer), where there is another type of USB-B connector and in the shortest possible length - the use of a transient reduction is ideal.
A): If a device without own power supply and higher current consumption is connected to an active power cord , the device may not work or works unreliably. If you want to use a self-powered device such as a printer at the end of the cable, no auxiliary power is needed.
B): The auxiliary power supply should be used at a higher demand than 100 mA, or when several cables are connected in series (behind each other). For details, refer to the User Manual (downloadable on the product page).
ACU-DS16
ADR-205
ADR-210
